Pond De-Icers: Thermo-Pond De-Icer
Email Sign-Up

FREE SHIPPING on orders $19+DETAILS ❯

Thermo-Pond De-Icer

SAVE 25%
Thermo-Pond De-Icer
| view larger image |

Size:
Tested to work in temperatures to 30° below zero.
Please Wait...
Price Per Item: 0
Subtotal: 0
Overview
*
Energy-efficient pond de-icer operates on only 100 watts
*
Will not harm pond liners or plastic ponds
*
Allows toxic gases to escape all winter long
Tested to work in temperatures to 30° below zero. Unique floating, thermostatically controlled de-icer operates on only 100 watts - incredibly energy efficient. 11-1/2" diameter unit has a heating chamber designed to keep an 8-1/2" hole free in the ice - allowing toxic gases to escape during winter months through its 2" center vent. De-icer will not harm pond liners or plastic ponds. Works in ponds up to 1,000 gallons. 10 ft cord. Works best in locations shielded from wind and in temperatures above 0ºF.

Please click on "More Information" for proper placement and operating instructions.

More Info
Working Thermo-Pond De-Icer

The Thermo-Pond De-Icer 3.0 is designed to keep open a vent hole in the ice to release harmful gases from underneath. If you allow your pond to completely freeze over during the winter months, the harmful gases produced by fish waste and plant decay cannot escape the ice. These trapped gases eventually build up to levels which are deadly for your costly fish and plants.

Please note: You will not see a large circle of open water surrounding your Thermo-Pond De-Icer. The unit melts the ice directly beneath it, then allows toxic gases to escape through the vent hole from within its center. Do not assume that it is not working properly if there is no open water encircling the unit.

Thermo-Pond De-Icer is recommended for ponds up to 1,000 gallons. Use an additional unit for each additional 1,000 gallons of water. Also, use an additional Thermo-Pond De-Icer if your pond requires extra gas exchange due to excessive plant decay or large quantities of fish under ice.

Instructions

Simply plug in your Thermo-Pond De-Icer and float it in your pond dome side up. You should begin to use your Thermo-Pond De-Icer when your pond has iced over. If the ice on your pond is more than 2" thick, drill a hole with an ice auger and place Thermo-Pond De-Icer over the hole. If the ice is less than 2" thick, place Thermo-Pond De-Icer directly on the ice and it will melt its way through. Do NOT chop through the ice in smaller ponds, as the resulting shockwaves can damage or kill fish. Always make safety your top priority - NEVER walk on thin ice. Try to position your Thermo-Pond De-Icer within an arm's reach of shore to avoid walking on the ice. Remove snow and ice from the top of the Thermo-Pond De-Icer.

After the winter season, wipe your Thermo-Pond De-Icer with a damp cloth and store in a clean, dry place. Always inspect your Thermo-Pond De-Icer before using. If the cord or plastic housing have cracks, do not use the unit.

Ratings & Reviews
Articles
Having an area free of ice is crucial for koi ponds or ponds with fish to allow proper gas exchange. Without an opening in the ice the supply of dissolved oxygen is depleted. Use our de-icer comparison chart to chose the right de-icer for your pond.
Your pond still has a lot going on under the ice of winter. These FAQs discuss general questions that pond keepers have about proper winter care.
Getting your pond ready for winter really begins in the fall. Water temperature, rather than air temperature, is the important indicator of when it's best to make changes to your pond. Use our Winter Survival Guide to get prepared for the season.
As winter approaches, you will want to make sure your pond system is clean and operating at 100% efficiency. You will also want to make sure that the water quality is as good as it can be. Use this article to learn how.
My Account